Month: December 2014

Electric Panel Board: Their Prominent Types

Electric Panel Board

Electric panel board, also known by the name of breaker panel and distribution board is a constituent of an electricity supply system that divides an electrical power feed into its subsidiary circuits, though providing circuit breaker for each circuit or a protective fuse in a common enclosure. Usually, a main switch, and in recent boards, one or more residual current devices (RCD) or residual current breakers with over current protection (RCBO), are also integrated. Depending upon the application, Electric Panel Board is of varied types:

  • Factory Assembled Panel Boards

Factory assembled panel boards are available in all common configurations. They are available directly through distributor stock to help cut down the lead times while providing a dependable solution for the light commercial projects.

  • Lighting Panel Boards

Panel boards are ideal for lighting and appliance branch circuit protection. Products are designed for sequence phase connection that permits complete flexibility of circuit arrangement (1-, 2- or 3-poles) to allow balance of the electrical load on each phase. The types and kinds of lighting panel boards are Fusible Lighting Panel boards, Pow-R-Line 1a and 2a, Pow-R-Line 3a, Pow-R-Line BCM panel board, Pow-R-Line 1R and 2R and Pow-R-Line 3E.

  •  Column Panels

Column Panels offer a proven design for warehouse, commercial and industrial applications. They measure a compact 8-5/8″ wide by 6″ deep and are easily mounted inside an I-beam for industrial applications. The main breaker lugs could be mounted for top or bottom feed. They are ideal for confined areas or renovation projects.

  • Elevator Control Panel board

Control panel boards are designed to meet the stringent requirements commanded by the multiple building codes. These codes are designed to offer fire protection and safety within elevator shafts. The elevator control panel board takes the speculation out of code compliance with respect to the electrical communications and electrical components systems.


Switchgear Manufacturers: Finding The Best One

switchgear manufacturers

When the power goes out, the lost productivity can be expensive to a company. Whether a company is operating equipment that cannot be turned off without disturbing output, running computers that teams work on without saving their work as they go, or even demanding to have exit paths lit in a calamity, persistent electricity access is vital. Many establishments have a standby generator on the premises; however having this device adjacent is not enough. Businesses must make sure to have regular maintenance performed on every machine, to guarantee that they turn on when disaster attacks. The most important preventive measure to consider is perhaps switchgear maintenance.

If you are unaccustomed with the inner workings of the machine, you must know that the switchgear is the term for the electrical tools that controls the flow of electricity within an electrical system. It serves two main functions. The first is to avoid short circuits or overloads, and the second is to de-energize circuits for testing. The most common switchgear is circuit breaker that halts the flow of electricity to a circuit as the electric current becomes high. It should be clear why a company needs to have this maintenance performed; if a circuit is blown at a critical time when energy is required, the effects could be disastrous. How may a generator service go about maintenance on this critical constituent?

Finding the perfect Switchgear Manufacturers might also be tricky. One must make sure that they are dealing with thefabricators that have been working with these devices for several years: wide-ranging experience that will let them diagnose any problem. Organizations must keep trained engineers on work, so that once problems are diagnosed, their workersare able to address them. Switchgear maintenance is apparently very important; nonetheless there are a number of additional measures to ponder while designing a plan for your device.

Are Your Switchboards Obsolete?


Traditional switchboards are still in use these days and still effectual. But it might be time to change. Has your home been refurbished? Do you have a lot many appliances running off the same fuse? Finding out could save you from lot of hassle.

Fuses are designed like a safety feature; however faulty fuses or just the plain old one could cause electrical problems, fires or short circuits. When a fuse trips and you’re left in dark it’s all ok till replacing the fuse, but have you really resolved the problem? The most general cause of a blackout is an excess that merely means several appliances plugged in. The next most general is a short circuit. It is harder to fix and would be because of the faulty wiring somewhere in the circuit that means an electrician would be called. You would need to find the problem by switching off the power and testing any appliances you think might have caused the blackout.

You must often inspect the fuse box for problems, with potential dangers in its environment. If the switchboards have any documentation, follow it thoroughly.

Additions to the fuse box might have also been made. To handle with an extra couple of appliances or the small renovation, it’s possible that a non qualified electrician or a handyman simply added a makeshift box next to the fuse box to lodge. If the fuse box looks like a game of Tetris then it’s time to replace.

Look at the choices when replacing the fuse box. Talk to an electrical services company about the right solution for the home. It might be best to replace the entire electricity system; however this would only really be necessary if someone has done a terrible job in the past. Don’t forget that the cheapest and easiest time to rewire is when the home is being renovated.